占樓！繼續上圖！

國際慣例！自發自頂！！！

好表啊，支持

;P 謝謝！此版太過冷清！

這一款應該是ETA7750的基礎機芯吧

瑞寶的三針一線最經典的應該是手動機芯的。

瑞寶的機芯都是自產吧，低調好品味！

這被透 好好看

小眾，挺厚;P

漂亮。。。。

[b]上論壇多時，經常看到不少表友迷戀于品牌的自產機芯，而對于以公用芯為基礎的機芯不屑一顧，今天剛好在某國外網站看到一篇鬼佬的短文，很有感觸。 草草翻譯一下，供大家討論討論~ （論壇高人無數，譯得不好，拍磚扔雞蛋都可以。。。） In many cases, watch factories modify these base calibers and sell them under their own name. While I was working my way through the "Uhrenkatalog" to compile the "manufactories" list, I noticed that the catalog usually lists both the proper caliber name and the caliber on which it is based, and I thought that you might be interested in this information. It might even influence your buying decisions when you are interested in a certain caliber. You should, however, consider that a company modifies these calibers when it gives them their own name and decide what is important for you. Such modifications may include a new balance, usually include hand finishing of plate and/or bridges and in some cases, the base caliber is really only the "base" to which some additional functions are added. This point is impressively illustrated when you look at Chronoswiss C.732 in comparison to its base caliber ETA/Valjoux 7750: There is a world of difference! In C.732, the calendar disc is removed, hour and minute hands are placed excentrically, and, above all, Chronoswiss adds their own patented modifications to make it a split second chronograph ("chronographe rattrapante"). Do not overestimate the term "base caliber" - the differences can be enormous! One company should be mentioned here for its excellent information policy: Oris includes detailed information about all movements in their "High Mech Booklet," and they are not afraid to publicly state that, e.g., the Oris 640 is based on the ETA 2836-2. (By the way: I have an Oris "Big Crown" with a 640 - the watch is not a certified chronometer, but it is accurate to one second per day! Careful finishing of large series calibers can produce extraordinary results.) It would be nice if other companies would follow Oris' example! 在很多情況下，手表廠商改裝公用機芯后以重新命名的自家機芯型號出售。當我致力于通過“Uhrenkatalog”編纂廠方機芯名錄時（什么是“Uhrenkatalog”俺不懂，好像是德文），我發現在此目錄中列出了廠家自家機芯號以及它們相對應的公用基礎機芯號。我想您可能對此感興趣，因為當您看中某款機芯時，這些資料實際上很可能影響您的購買決定。 實際上，當廠商改裝公用機芯并重新命名機芯號后，您應該考慮的是，究竟什么才是對您最重要的。類似的改裝可能包括新的平衡裝置，通常還包括對機芯夾板和板橋的手工打磨。在這種情況下，所謂的基礎機芯對比廠商所增加的其他功能組件來說完全真的可以稱作僅僅是“基礎”而已了。 [color=DarkRed][b] 舉例來說，當您欣賞Chronoswiss瑞寶機芯732時，如果您同時比較一下它的基礎芯：ETA7750，這簡直就是另一個世界。瑞寶732移除了7750的日歷盤，時輪和分輪被移離中央位置，更重要的是：瑞寶還加裝了他專利的秒計時組件。 所以，請不要過于困擾于所謂的“公用基礎機芯”，它經過改裝后的變化可能是極其巨大的。[/b][/color] 在這里有必要特別提一下一家公布機芯信息資料非常完整的廠商：Oris豪力時，這個品牌在它的“高級機芯手冊”里公布了他所有機芯的技術資料，并沒有因羞于使用公用機芯而刻意隱瞞相關的數據。比如說，它明確說明了Oris 640是基于ETA 2836-2而來。（順便說一下，我有一只Oris的“Big Crown”，機芯就是640，雖然它沒有天文臺認證，可是每天的誤差只有一秒鐘，可見只要對于基礎公用機芯做全面細致的高質量打磨，就能給機芯素質帶來翻天覆地的改變）。其他廠商真的應該像Oris好好學習了。[/b]

這個跑不出阿諾的手心！

呵呵！低調才是阿諾的菜！

除了背透呢？;P

小眾是我堅持的路線！

先謝謝了！！

原來姓德　現在姓瑞！

漂亮